film faced plywood
Heading layer
Heading layer
anti slip resistant plywood hex
previous arrow
next arrow
Slider

Knowledges For Purchasing Marine Plywood

Super Thin Film faced plywood

Thin marineplex is not easy to produce. Only a few factories are producing thin film faced plywood like 3.6mm and 4.0mm .They also producing 6,5; 9; 12; 15; 17,18; 21; 24; 27; 30; 35; 40; 50; 60 mm. The thinner ply are easily rejected because of the blisters or bubbles.

Size Tolerance

Size and right angle tolerance meets the customers’s quality requirements. Cut to size sheets and machining available in accordance with the customers’ requirements.

Phenolic Coated Film Colors

Normally chestnut brown or dark brown, also light brown transparent, dark brown, yellow non– transparent and transparent, green, colourless, black, grey, red. More colours on request. Under transparent films BB grade veneer is applied.

  • yellow non-transparent – 167 g/m²
  • red – 220 g/m²
  • grey – 170 g/m²
  • Light brown transparent – 120 g/m²
  • black – 120 g/m²
  • green – 120 g/m²

film faced plywood factory china

Glue Standards

Plywood is glued with waterproof phenol formaldehyde resin adhesive. Bonding is resistant to weather and boiling water. It meets requirements of the following standards:

  • EN 314 / 3rd class;
  • BS 1203 / H4 (previously WBP);
  • DIN 68705 Part 3 / type BFU 100.

Edge Sealing

Edges of the marineplex are matched with the face against absorption of moisture by using acrylic paint. Many colors are available.

admin